MIG inverter welders for mild steel and aluminium
Pearl/Pearl XL single-phase MIG inverter welders
GYS has launched the Pearl and Pearl XL single-phase MIG inverter welders designed for small to medium-sized companies undertaking light fabrication and maintenance work.
The welders are also suitable for craftsmen and DIY enthusiasts.
The Pearl and Pearl XL welders are suitable for welding mild steel, aluminium and stainless steel using standard MIG or flux-cored welding wires.
The feature GYS power management technology; integrated flexible voltage, which automatically adapts to any voltage in the range 85-265V; and power factor correction technology, which increases efficiency.
In combination, these features are said to overcome power supply problems caused by imperfect generators or long extension leads.
A feature of these machines is GYS's synergic welding technology, which gives the welder good welding characteristics including a perfectly controlled welding current to give a very stable arc, producing a smooth weld bead requiring no further finishing.
To achieve this, all the welder has to do is program the current and sheet thickness, then weld.
If the operator wishes, traditional manual setting of the welding parameters can be selected.
On the front panel two control knobs and a large digital screen allow the welder to easily set the required parameters.
The specification also extends to both machines being supplied with a Euro removable welding torch and earth clamp, plus a fixed power cable.
In addition, the Pearl XL will accommodate a large 15kg wire reel, feeding it through a four-roller system.
The 230V Pearl is rated 120A at 60 per cent duty cycle using a 13A plug and 0.6-0.8mm-diameter MIG wire as well as 0.9mm flux-cored wires, both from either 100mm- or 200mm-diameter wire spools.
It weighs 10kg.
The 230V Pearl XL is rated 120A at 60 per cent duty cycle using a 13A plug and 0.6-1.00mm diameter MIG wire as well as 0.9mm flux-cored wire, both from either 200mm- or 300mm-diameter wire spools.
It weighs 18kg.
GYS has introduced the GYSMI 253 CEL, a 400V three-phase 250A MMA/TIG portable welding inverter that is suitable for use in boiler making, pipework and general-purpose heavy-duty welding applications.
GYS has launched the Trimig 255-4S, an easy-to-use three-phase synergic MIG/MAG welder designed for maintenance and general fabrication welding using mild steel, stainless steel and aluminium.
Welding equipment and battery charger manufacturer GYS has launched Monogys 182-2S, a Synergic single-phase 13A/230V microprocessor-controlled MIG/MAG welding machine.
GYS's TIG 200 HF DC FV (flexible voltage) microprocessor-controlled welder utilises inverter welding technology and is suitable for 110V TIG and MMA welding using 1.6 to 4mm electrodes.
GYS has launched the single-phase 230V Plasma Cutter 21 and the flexible-voltage 85-265V Plasma Cutter 31FV for industrial maintenance and car-body repair work, as well as on-site work.