GYS welder enables general factory maintenance
TIG 200 HF DC FV welder
GYS's TIG 200 HF DC FV (flexible voltage) microprocessor-controlled welder utilises inverter welding technology and is suitable for 110V TIG and MMA welding using 1.6 to 4mm electrodes.
It is designed for pipe welders and boilermakers, as well as general factory and equipment maintenance work using mild steel, stainless steel and copper.
This single-phase 230V machine is rated 200A at 40 per cent duty cycle for normal use at 20C and has a 85V OCV.
TIG 200 HF DC FV employs the latest GYS technology, with flexible voltage and power factor correction (PFC), allowing it to automatically adapt to any voltage in the range 85 to 265V.
The advanced PFC device enables the machine to maintain its high welding performance on sub-optimal power supplies.
Another benefit is reduced power costs, as the welder is able to draw more energy from the plug.
Features include fully adjustable normal TIG, pulsed TIG and spot TIG modes; a five-memory capability to save selected settings; excellent arc characteristics; adjustable HF or LIFT start; and IP23 protection rating for outside use.
When TIG welding, the Lift Arc function provides easy-to-start welding, while preventing tungsten inclusions.
It also has an adjustable arc-down slope function that automatically releases the torch at the end of the weld.
It is lightweight and its control panel is designed to be easy to operate and read.
Options include a connection for a foot remote control, as well as an accessory pack with a TIG torch and welding cables to suit the application.
GYS has launched the Pearl and Pearl XL single-phase MIG inverter welders designed for small to medium-sized companies undertaking light fabrication and maintenance work.
GYS has introduced the GYSMI 253 CEL, a 400V three-phase 250A MMA/TIG portable welding inverter that is suitable for use in boiler making, pipework and general-purpose heavy-duty welding applications.
GYS has launched the Trimig 255-4S, an easy-to-use three-phase synergic MIG/MAG welder designed for maintenance and general fabrication welding using mild steel, stainless steel and aluminium.
Welding equipment and battery charger manufacturer GYS has launched Monogys 182-2S, a Synergic single-phase 13A/230V microprocessor-controlled MIG/MAG welding machine.
GYS has launched the single-phase 230V Plasma Cutter 21 and the flexible-voltage 85-265V Plasma Cutter 31FV for industrial maintenance and car-body repair work, as well as on-site work.