Gas cutting

Supplier Network

Stories with this subject.

  • ESAB offers gantry cutting machine for small to medium fabricators and manufacturers weblink

    ESAB Cutting Systems |Mon, 11 Jun 2012

  • ESAB supplies Falcon cutting system for use on semi-submersible crane and pipe-laying vessel

    ESAB Cutting Systems |Mon, 18 Jul 2011

    A Falcon FXA 3000 cutting system from ESAB has been added to the range of pipe-laying and fabrication equipment on board the Saipem 7000 semi-submersible crane and pipe-laying vessel.

  • Pipe-laying vessel uses ESAB cutting system

    ESAB |Wed, 25 May 2011

    The Saipem 7000 semi-submersible crane and pipe-laying vessels has added an ESAB Falcon FXA 3000 cutting system to its range of on-board pipe-laying and fabrication equipment.

  • Plasma cutting machine for decorative metalwork

    Weldability-SIF |Fri, 20 May 2011

    Weldability-Sif has introduced the Plasma 50, a single-phase, 230V, 13A portable plasma cutting package for use in automotive body repair and small and medium-sized fabrication shops.

  • Tag selects ESAB's Suprarex cutting systems download

    ESAB Cutting Systems |Wed, 20 Apr 2011

    ESAB Cutting Systems is supplying two Suprarex cutting systems, fitted with three gas cutting heads, to Tag Energy Solutions for installation at its site at Haverton, Hill, Billingham on Teesside.

  • ESAB enhances oxy-fuel Cooljet cutting torch

    ESAB Cutting Systems |Fri, 25 Mar 2011

    ESAB Cutting Systems has further developed its oxy-fuel Cooljet cutting torch to include more features, including the new tool-free cutting nozzle exchange, achieved through the Jetcon system.

  • ESAB guide focuses on oxy-fuel cutting

    ESAB Cutting Systems |Wed, 16 Feb 2011

    The Cooljet Pro, Triplejet and Gridjet oxy-fuel cutting torches from ESAB Cutting Systems are featured in the company's 12-page guide to oxy-fuel cutting.

  • Cutter suitable for oxygen/acetylene cutting

    Murex Welding Products |Wed, 2 Feb 2011

    Murex Welding Products' Saffire Elite cutter combines strong materials, durable design, quick nozzle changes and greater operator control to benefit oxy-fuel cutting and heating applications.

  • ESAB wear parts for plasma and oxy-fuel cutting

    ESAB Cutting Systems |Wed, 2 Feb 2011

    ESAB Cutting Systems has introduced an extended range of wear parts and consumables for its ranges of plasma and oxy-fuel cutting machines.

  • Malthouse fabricates Sandwell welcome sign

    Malthouse Engineering |Thu, 16 Dec 2010

    Malthouse has worked with Sandwell Metropolitan Borough Council to fabricate a welcome sign to be installed on Birchley Island at Junction Two of the M5 and the Birmingham Wolverhampton new road.

  • Flame cutting machine features plasma torch option

    ESAB Cutting Systems |Fri, 3 Dec 2010

    The portable IMP flame cutting machine from ESAB can now be fitted with a plasma torch for light plasma cutting operations.

  • Gemini CNC machine improves productivity

    FICEP |Fri, 12 Nov 2010

    FICEP has launched the Gemini CNC machine designed to improve productivity and material handling times in profile cutting, drilling, machining and scribing applications.

  • ESAB develops plasma-cutting retrofit package

    ESAB Cutting Systems |Fri, 22 Oct 2010

    ESAB Cutting Systems is offering M3 Plasma retrofit packages for companies looking to incorporate the latest plasma cutting and marking technology on existing equipment.

  • ESAB offers refurbished plasma cutting machine

    ESAB Cutting Systems |Wed, 22 Sep 2010

    ESAB is offering a fully refurbished Swift plasma cutting machine as a cost-effective, entry-level alternative to investment in a new machine.

  • ESAB plasma machine cuts sheet metal and ductwork

    ESAB Cutting Systems |Thu, 19 Aug 2010

    Designed specifically for the sheet metal fabricators and the heating and ventilation fabricator, the E-Vent plasma machine from ESAB Cutting Systems is suitable for sheet metal and ductwork cutting.

  • ESAB Cooljet cutting torch cuts mild steel

    ESAB Cutting Systems |Wed, 11 Aug 2010

    ESAB Cutting Systems has announced that its Cooljet high-performance oxy-fuel cutting torch is now available in a low-priced conversion package.

  • ESAB launches oxy-fuel flame cutting system

    ESAB Cutting Systems |Wed, 21 Jul 2010

    ESAB Cutting Systems, a provider of machines that meet the requirements of custom fabrication shops through to large production operations, has introduced the Quattrojet oxy-fuel flame cutting system.

  • HPLC range enables plasma cutting in small shops

    Techno |Mon, 12 Jul 2010

    Techno has introduced the HPLC CNC Plasma Cutter Series, designed for small to mid-sized shops that wish to expand their manual plasma process.

  • Cutting machine ideal for automated production

    ESAB Cutting Systems |Tue, 22 Jun 2010

    ESAB Cutting Systems has launched the Combirex plasma-arc and oxy-fuel gas profile cutting machine designed to meet the needs of job shops and manufacturers for maintenance work and parts production.

  • Control system compatible with oxy-fuel machines

    ESAB Cutting Systems |Thu, 3 Jun 2010

    Compatible with oxy-fuel, plasma cutting and marking machines, ESAB's Vision 51R CNC control system technology is available as a drop-on replacement for existing customers using ESAB NCE controllers.

  • Preventative maintenance on ESAB cutting systems

    ESAB Cutting Systems |Mon, 10 May 2010

    Preventative maintenance programmes from ESAB Cutting Systems ensure that customers get the best possible return on investment from the company's plasma, oxy-fuel and laser cutting systems.

  • FICEP to present CNC machines at Mach 2010

    FICEP |Thu, 15 Apr 2010

    FICEP will present a variety of CNC machines, including the Gemini 254 PG and the 601 DE Excalibur 6, on Stand 4740 at Mach 2010, which is due to be held at the NEC in Birmingham on 7-11 June.

  • Carrier programme uses ESAB plasma steel cutter

    ESAB Cutting Systems |Mon, 12 Apr 2010

    ESAB has announced that its plasma cutting technology has been utilised in a programme to build new aircraft carriers for the UK at Portsmouth Naval Base.

  • ESAB offers plasma-arc consumables range

    ESAB Cutting Systems |Tue, 9 Mar 2010

    ESAB Cutting Systems is offering customers a range of plasma-arc consumables including spare and wear parts.

  • ESAB introduces plasma-arc consumables

    ESAB Cutting Systems |Mon, 1 Feb 2010

    ESAB Cutting Systems now offers a wide range of plasma-arc consumables including spare and wear parts.

  • Plasma cutters incorporate Baldor servomotors

    Baldor |Mon, 11 Jan 2010

    Techserv Cutting Systems has delivered four HS 4000 hi-definition precision plasma cutters to the UK’s Aircraft Carrier Alliance (ACA).

  • Cloos plasma cutting robot reduces production time

    Carl Cloos Schweisstechnik |Wed, 9 Dec 2009

    Stainless-steel processor AMS is rationalising its production with a robotic plasma-arc cutting plant from Cloos.

  • NC Engineering buys ESAB Suprarex cutting system

    ESAB Cutting Systems |Fri, 23 Oct 2009

    NC Engineering has purchased an ESAB Suprarex SXE-P1 high-precision cutting system, complete with a plasma unit, a fume extraction table and the Columbus CNC software.

  • Autorex plasma-arc centre cuts 25mm-thick metals

    ESAB Cutting Systems |Wed, 21 Oct 2009

    Esab Cutting Systems' Autorex fully encapsulated automatic plasma-arc cutting centre offers precise heavy-duty cutting of steel, stainless steel and aluminium up to 25mm thick.

  • Plasma cutting system covers 0.5-100mm range

    Kjellberg Finsterwalde |Thu, 15 Oct 2009

    The HiFocus 440i high-precision plasma cutting system covers a cutting range from 0.5 to 100mm.

  • Finefocus plasma-arc cutting machine launched

    Kjellberg Finsterwalde |Wed, 14 Oct 2009

    Kjellberg Finsterwalde has announced its intention to launch the Finefocus 600 plasma-arc cutting machine at Schweissen and Schneiden 2009.

  • ATChanger for Hifocus plasma-arc cutting systems

    Kjellberg Finsterwalde |Tue, 13 Oct 2009

    Kjellberg Finsterwalde is offering the ATChanger (automatic torch changer), a component for the automated change of plasma-arc torch heads.

  • Plasmatech and ATTC launch PHD torches

    Plasmatech |Tue, 13 Oct 2009

    Plasmatech (UK) has launched a range of Plasma High Definition (PHD) torches in conjunction with ATTC.

  • ESAB supplies cutting machine to shipyard

    ESAB Cutting Systems |Tue, 29 Sep 2009

    ESAB Cutting Systems has supplied a large Telerex cutting machine equipped with plasma cutting technology and ink jet marking to the BVT shipyard in Govan.

  • Cut-price Omnimat plasma-arc cutting machine

    ESAB Cutting Systems |Fri, 11 Sep 2009

    ESAB Cutting Systems is offering a pre-owned Omnimat high-definition plasma-arc cutting and marking machine, suitable for shipbuilding and many other heavy-duty fabrication applications.

  • ESAB machine provides entry-level profile cutting

    ESAB |Wed, 26 Aug 2009

    ESAB's entry-level Ultrarex UXB coordinate cutting machine is a utility tool that can be fitted with up to four cutting heads for low- and high-volume production runs.

  • NUM to exhibit tool head and 3D simulation package

    NUM |Tue, 28 Jul 2009

    NUM will launch a ready-integrated tool head for sophisticated plasma-arc, laser and waterjet cutting machinery applications at EMO 2009, which is scheduled to take place in Milan on 5-10 October.

  • M3 plasma cutting system offers quick installation

    ESAB Cutting Systems |Mon, 20 Jul 2009

    ESAB Cutting Systems' M3 plasma cutting system is a complete high-performance system that is quick and easy to install and demands little in terms of operation and maintenance.

  • Brown McFarlane buys ESAB plasma power sources

    ESAB Cutting Systems |Fri, 26 Jun 2009

    Brown McFarlane of Stoke-on-Trent, a distributor and processor of steel plates, has invested in plasma power sources from ESAB Cutting Systems.

  • Plasma-arc developments on display in Essen

    Kjellberg Finsterwalde |Fri, 12 Jun 2009

    Kjellberg Finsterwalde will demonstrate plasma-arc developments for welding and plasma cutting at the Schweissen and Schneiden 2009 trade fair in Essen, Germany.

  • Bevelling head suits wind turbine tower production

    ESAB Cutting Systems |Mon, 1 Jun 2009

    ESAB Cutting Systems can provide wind turbine manufacturers with automated CNC bevelling head technology that can be used on a range of the company's profiling machines.

  • PP Plasma uses ESAB submerged plasma cutter

    ESAB |Fri, 29 May 2009

    PP Plasma, a specialist in plasma, laser and waterjet profiling, has invested in an ESAB Cutting Systems Suprarex SXE P2 submerged plasma cutting machine for its purpose-built premises in Salford.

  • ESAB PDM tracks cutting system performance

    ESAB Cutting Systems |Fri, 8 May 2009

    ESAB Cutting Systems production data management system (PDM) is designed to control, track, record and report the performance of a cutting system in real time.

  • Autodrill adds option to cutting machines

    Autodrill |Wed, 22 Apr 2009

    Autodrill has enabled a manufacturer of oxyacetylene cutting machines to offer a hole drilling option.

  • ESAB introduces Falcon cutting machine

    ESAB Cutting Systems |Tue, 31 Mar 2009

    The Falcon entry-level compact cutting machine from ESAB Cutting Systems can be fitted with oxy-fuel cutting torches or can be supplied as an oxy-fuel package prepared for plasma-arc cutting.

  • Fintec uses ESAB profile cutting technology

    ESAB Cutting Systems |Tue, 3 Mar 2009

    ESAB Cutting Systems's profile cutting technology is playing a role in the production of mobile crushing and screening equipment manufactured by Fintec Crushing and Screening.

  • ESAB launches CNC plasma-arc cutting power source

    ESAB Cutting Systems |Mon, 22 Dec 2008

    ESAB Cutting Systems has launched a CNC plasma-arc cutting power source that provides high-speed cutting of materials from 0.5mm to 100mm.

  • RUR plasma cutter improves efficiency at Odon

    Kerf Developments |Thu, 18 Dec 2008

    Odon Equestrian turned to Kerf Developments to supply the plasma-arc cutting equipment that is helping the manufacturer of equestrian equipment improve efficiency and cost.

  • ESAB adds marking facility to plasma-arc cutter

    ESAB Cutting Systems |Thu, 16 Oct 2008

    ESAB Cutting Systems's m3 plasma-arc cutting machine can now both cut and mark material with the same plasma torch, offering higher productivity from a simple-to-use system.

  • Plasma-arc cutting system deemed value for money

    ESAB |Thu, 11 Sep 2008

    As part of a recent new facilities investment, NC Engineering has purchased an ESAB Suprarex SXE-P1 high-precision cutting system with plasma-arc unit, fume extraction table and Columbus software.

  • Supramex to suit specific cutting requirements

    ESAB Cutting Systems |Sat, 23 Aug 2008

    ESAB Cutting Systems has announced that its latest Supramex modular gantry cutting machine can be configured to suit specific cutting requirements.

  • 'Entry level' CNC cutting machine introduced

    ESAB Cutting Systems |Thu, 14 Aug 2008

    ESAB Cutting Systems' brochure describes the Falcon low cost cutting machine that can be fitted with oxy-fuel gas cutting torches or can be supplied as an oxy-fuel package ready for plasma-arc work.

  • Cooljet torch automates oxy-fuel gas cutting

    ESAB Cutting Systems |Thu, 1 May 2008

    Esab Cutting Systems has introduced a conversion package allowing oxy-fuel gas cutting machine users to convert to Esab's Cooljet torch to raise productivity.

  • CNC cutting systems peripheries described

    ESAB Cutting Systems |Wed, 16 Apr 2008

    Modular cutting tables for cutting metals up to 300mm thick or 3000mm x 6000mm, are included in a range of peripheral accessories described in recent ESAB literature.

  • ESAB introduces 'entry level' CNC cutting machine

    ESAB Cutting Systems |Tue, 15 Apr 2008

    To enable small subcontractors to cut and profile metal components in-house, ESAB has introduced an 'entry level' CNC oxy-fuel gas or plasma-arc cutting and profiling machine.

  • Plasma-arc profiler enables small batch work

    ESAB Cutting Systems |Mon, 20 Aug 2007

    A customised plasma-arc cutting and profiling system has enabled a maker of building components to produce small batch sizes of 100 to 200 pieces economically and accept customised projects.

  • CNC plasma-arc profilers raise capacity

    ESAB Cutting Systems |Mon, 13 Aug 2007

    Three CNC cutting and profiling systems, using advanced plasma-arc cutting and precision guidance systems, produce ultra-precise blanks, usable without time-consuming manual reworking.

  • CNC plasma-arc profiler has quick set-up

    ESAB Cutting Systems |Thu, 29 Mar 2007

    UK stainless steel stockholder has acquired a CNC plasma-arc cutting and profiling machine based on its quick set-up times that can be achieved and its fast traverse and cutting speeds.

  • Oxy-fuel gas profiler traces or uses CNC

    ESAB Cutting Systems |Tue, 20 Feb 2007

    To avoid using subcontractors, a Swedish company has produced a co-ordinate oxy-fuel gas cutting machine that has photo-electric tracing or can work with CNC.

  • Refurbished plasma-arc cutter has latest CNC

    ESAB Cutting Systems |Fri, 9 Feb 2007

    Refurbished plasma-arc cutting and profiling machine has all mechanical bearings, control panels, co-ordinate drive mechanisms, cutters, posts and gas hoses replaced, and latest CNC retrofitted.

  • High speed plasma-arc profiler described

    ESAB Cutting Systems |Thu, 21 Dec 2006

    Literature describes a high performance, competitively priced high speed plasma cutting machine, which offers an option for oxy-fuel cutting.

  • CNC plasma-arc machine brings work in-house

    ESAB Cutting Systems |Thu, 23 Nov 2006

    Specialist steel plate supplier now has a high-quality CNC plasma-arc profiling system that has improved its production efficiency and reduced its reliance on external suppliers.

  • Bevel head plasma-arc torch does edge-preps

    ESAB Cutting Systems |Sun, 5 Nov 2006

    Plasma-arc cutting and profiling machine has a bevel head that allows profiling and edge preparation on plate profiles to be carried out simultaneously and accurately.

  • Plasma-arc and waterjet cutting combined

    ESAB Cutting Systems |Fri, 11 Aug 2006

    A CNC multi-process waterjet cutting system uses ESAB's patented waterjet/plasma combination to produce cut parts using the speed of plasma-arc and the accuracy of waterjet.

  • Plasma-arc system offers precision cutting

    ESAB Cutting Systems |Fri, 11 Aug 2006

    Plasma-arc cutting system system produces high-speed, low-cost operation; high-quality precision cutting and marking; and high-current, thick-plate cutting - all with a single plasma torch.

  • Software covers different cutting machine systems

    ESAB Cutting Systems |Fri, 11 Aug 2006

    Programming and nesting software package is designed specifically for plasma, oxyfuel, laser, and waterjet cutting and supports straight and bevel cutting, as well as all current marking devices.

  • Guide advises on gas cutting machine refurbishment

    ESAB Cutting Systems |Sun, 6 Aug 2006

    A guide to the specification of refurbished profile cutting machines describes a refurbishment and retrofit service for any old ESAB, BOC or Hancock gas cutting machines in use.

  • Portal cutting machine is compact, low-cost

    ESAB Cutting Systems |Thu, 13 Jul 2006

    A low cost, compact portal cutting machine will appeal to small and medium sized companies looking for a competitively priced cutting system that optimises quality, productivity and efficiency.

  • Off-line CAD/CAM simplifies nesting/cutting

    ESAB Cutting Systems |Wed, 14 Jun 2006

    A powerful off-line drawing, editing and nesting software for CNC profiling machines allows drawing, nesting and cutting operations to be performed quickly off-line, without fuss.

  • Plasma cutting range with high cutting speeds

    ESAB Cutting Systems |Thu, 1 Jun 2006

    The most recent addition to ESAB Automation's plasma cutting range is the Suprarex SXE-P.

  • Portal profilers get network compatible NC

    ESAB Cutting Systems |Sat, 29 Apr 2006

    A network compatible NC system for portal cutting machines supports all conventional computer interfaces and Ethernet or LAN network connections and can be connected via Bluetooth or Internet.

  • Programming module covers CNC profiler nesting

    ESAB Cutting Systems |Wed, 15 Feb 2006

    Nesting module enables individual CNC oxy-fuel gas, plasma arc or laser cutting and marking programs to be created even more quickly and easily and provides material savings of up to 7%.

  • Plasma-arc CNC profilers offer high accuracy

    ESAB Cutting Systems |Tue, 31 Jan 2006

    Portal cutting machines have been designed for precision plasma-arc cutting, combine high productivity with high accuracy and their advanced process integration ensures high levels of cutting quality.

  • One plasma-arc bevel head cuts in 2D and 3D

    ESAB Cutting Systems |Wed, 9 Nov 2005

    One plasma-arc bevel cutting head cuts circular parts, dished ends, tubes and pipes and can be used for normal 2D vertical and weld edge preparation cutting on flat plate.

  • Switch easily for different plasma-arc cut options

    ESAB Cutting Systems |Mon, 31 Oct 2005

    Depending on whether one wants to produce a fine quality plasma-arc cut or cut the plate as quickly as possible, it is easy to switch from one quality level option to the other.

  • High speed machine plasma cuts HVE ducts

    ESAB Cutting Systems |Mon, 17 Oct 2005

    High speed plasma cutting machine is designed specifically for sheetmetal ductwork production and the heating and ventilation industry and is linked to shape library.

  • Guide kit issued for plasma cutting torches

    ESAB |Sun, 9 Oct 2005

    ESAB has introduced a 'Plasma Deluxe Guide Kit' that has a full set of bushings and sleeves is designed to suit the company's entire range of plasma cutting torches.

  • Two-torch plasma cutting allows tandem loading

    ESAB Cutting Systems |Wed, 7 Sep 2005

    Latest plasma-arc power source and two-torch system cuts and mark materials and allows tandem loading of the cutting machine to optimise the actual cutting time.

  • Award winner invests in CNC profiling

    ESAB Cutting Systems |Sun, 14 Aug 2005

    One of the largest further education colleges in the UK, which won Its third Centre of Vocational Excellence plaque, has invested in a CNC plasma-arc/fuel-gas profiling machine.

  • PC system controls profile cutting systems

    ESAB Cutting Systems |Sat, 16 Jul 2005

    Advanced controller designed to control medium sized portal profile cutting machines provides a graphical user interface on a PC based system that is reliable and simple.

  • Off-line CAD programming directs CNC profilers

    ESAB Cutting Systems |Mon, 27 Jun 2005

    Off-line CAD programming system for CNC profiling machines has software that can turn Windows text into CNC code so that if it can be typed, it can now be cut.

  • Power source suits plasma cutting and marking

    ESAB Cutting Systems |Sun, 15 May 2005

    Plasma-arc power source that can be fitted with a combination of torches for plasma cutting and marking eliminates downtime and improves productivity.

  • Gas and plasma-arc cutting raises versatility

    ESAB Cutting Systems |Thu, 25 Nov 2004

    Looking to invest in a cutting machine that would improve the scope of service, a subcontractor chose a combined gas and plasma-arc system for versatility and high accuracy.

  • CNC cutter/profiler uses fuel gas and plasma-arc

    ESAB Cutting Systems |Thu, 24 Jun 2004

    High performance, competitively priced oxy-fuel gas and plasma machine can be fitted with up to four tool carriages, of which one can be dedicated to precision 200A plasma cutting torch.

  • Programmed marking on profilers saves time, costs

    ESAB Cutting Systems |Fri, 11 Jun 2004

    To maximise productivity, a number of alternative marking processes for use in conjunction with cutting and profiling machines can be programmed to place assembly signs, lines and coding.

  • CNC gantry machine offers four profiling process

    ESAB Cutting Systems |Wed, 3 Mar 2004

    Novel gantry machine offers a four profiling process capability - waterjet, plasma cutting, oxyfuel cutting and plasma marking - all programmed through one CNC system.

  • Precision plasma profiler raises production rates

    ESAB Cutting Systems |Mon, 22 Dec 2003

    Investment in a precision plasma cutting machine has brought higher productivity rates, reduced cycle times and a higher quality product to a shopfitting equipment manufacturer.

  • CNC bevelling head speeds wind tower fabrication

    ESAB Cutting Systems |Mon, 3 Nov 2003

    Automated CNC bevelling head used on profiling machines produces a variety of weld edge preparations on different steel plate thicknesses used in the fabrication of wind turbine towers.

  • Cutting and profiling machines improve quality

    ESAB Cutting Systems |Fri, 4 Apr 2003

    Around oxy-fuel, plasma, laser and water jet cutting, a range of machines deliver better cut quality, higher cutting speeds, lower operating costs and automation systems integration.

  • Low cost cutting machine brings extra benefits

    ESAB Cutting Systems |Thu, 20 Feb 2003

    Capable of being used as a high speed plasma machine or for single or twin head oxy-fuel cutting, features and benefits normally associated with more expensive cutting machines are offered.

  • Plasma arc profiling system cuts precise parts

    ESAB Cutting Systems |Thu, 20 Feb 2003

    Specifically designed for precision plasma applications, a profiling machine combines high productivity, exceptional accuracy and advanced process integration to cut quality parts.

  • Profile follower burner can be CNC retrofitted

    ESAB Cutting Systems |Thu, 20 Jun 2002

    For those fabricators looking to move away from employing sub-contract plate profiling services, a co-ordinate gas cutting machine is being offered at a low 'entry level' price.