Test probe suits horizontal mounting applications
Peak Test Services
P221/G probe
The new P221/G from Peak Test Services is a miniature threaded switching test probe with a short mounting length of 24.5mm, allowing it to be used with devices with pin spacings of 2.54mm.
The P221/G exerts a relatively low pressure, making it suitable for the detection or presence sensing of closing surfaces, components or connectors.
It is especially designed for use in horizontal mounting applications where the installation space is limited.
The probe is also available with a replacement design, enabling the test probe to be replaced without de-soldering the wire with a resultant reduction in maintenance requirements.
The P221/G series is available in the UK and Ireland from Peak Test Services and worldwide via a range of appointed distributors.
More stories
Peak tool detects blocked or tight plungers in the probes used in automatic test equipment
Peak Test Services has introduced a tool designed to detect blocked or tight plungers in the test probes used in automatic test equipment (ATE).
P275 switching test probe has 1mm diameter
The P275 miniature switching test probe has a diameter of 1mm - or 1.41 mm including the probe receptacle - making it suitable for applications involving devices with 1.91mm spacing.
Switch probe has built-in isolation
The P201/GVF from Peak Test Services is a normally open switch probe with built-in isolation for use in voltage-free ICT (in-circuit test) applications.
Screw-in probe suits 1.9mm centre spacings
The P75/G sprung test probe from Peak Test Services is a threaded screw-in probe designed for use with 1.9mm (75mil) centre spacings.
Threaded switch probe copes with lateral forces
The P888/G from Peak Test Services is a normally-open threaded switch probe incorporating an integrated ball as the contact element at the top of the plunger.
