Stantronic introduces LCR Meter LCR-8110G
Stantronic Instruments
LCR Meter LCR-8110G
Stantronic Instruments' LCR Meter LCR-8110G has a test frequency that is ten-fold higher than its predecessor.
It can therefore much better simulate the operating conditions of the devices tested.
Basic accuracy for all RLC measurements is 0.1 per cent with test frequencies of 20Hz up to 10MHz.
In multi-step mode, the unit can perform up to 30 different measurements on one component.
It has a pass/fail function with an acoustic alarm and many parameter options to set.
Up to 64 test programs can be stored in non-volatile memory.
The characteristics of the component under test can be displayed on an LCD graphics screen (320x240 pixels), with either the voltage range or the frequency sweep on the horizontal axis.
The unit comes with RS-232 and GPIB interfaces for remote control and transfer of test data to a remote computer for further analysis.
Various optional test leads and fixtures are available for different component types and 2/4 wire measurements.
For reduced frequency requirements, a 5MHz version (LCR-8105G) is available.
More stories
AFG-3000 Series creates high-resolution waveforms
The AFG-3000 Series Arbitrary Waveform Generators from Gwinstek offer DDS (Direct Digital Synthesis), enabling a variety of high-resolution, high-accuracy waveforms to be created.
PC-based oscilloscopes offer two 9-bit channels
Acute is offering the DS-1000 Series of PC-based digital oscilloscopes, said to provide the majority of functions and features required by design, test and process engineers.
Digital oscilloscopes feature large memory depth
The GDS-1000A Series is a range of digital oscilloscopes from GW Instek, distributed in the UK by Stantronic Instruments.
Tektronix launches coherent lightwave signal analyser for optical research laboratories
Tektronix has launched the OM4106D coherent lightwave signal analyser, which are designed for use in optical research laboratories and feature 33GHz bandwidth support.
MSC offers differential oscillators suitable for use in wireless base stations
MSC is offering SiT9121 and SiT9122 differential oscillators from Sitime, which are suitable for use in centralised and edge routers, SATA/SAS/Fibre channel host bus adaptors, cloud storage systems, servers, wireless base stations and 10G Ethernet switches.
