Spectrum Master for monitoring interfering signals
Anritsu
MS2711E Spectrum Master
The handheld MS2711E Spectrum Master is designed for technicians, installers, field RF engineers and contractors responsible for monitoring interfering signals and assessing signal quality.
The MS2711E comes equipped with a touch-screen interface, shortcut icons and intuitive menus.
The latest Spectrum Master model also has built-in system level measurements, such as occupied-bandwidth, adjacent channel power ratio, emission-mask and field-strength measurements.
The MS2711E can be configured with various options, such as an interference analyser, channel scanner, power meter and GPS receiver, to create an integrated solution that eliminates the need to carry multiple instruments.
Rugged and lightweight, the MS2711E is designed for field use.
Weighing less than 3.5kg, the handheld spectrum analyser provides a bright 8.4in touch-screen display.
Operating temperature is -10 to 55C with a warm-up temperature of less than 5min.
Battery life is greater than three hours.
Covering the 100kHz to 3GHz frequency range, the MS2711E has displayed average noise level of more than -142dBm in 100Hz RBW, dynamic range of more than 85dB to measure small signals in the presence of larger ones and frequency accuracy of less than +/-50 ppb with GPS.
Master Software Tools (MST) is provided with each MS2711E, as well as all Spectrum Master instruments.
MST provides a method to manage, archive, analyse and print measurement reports, and keep the analyser current with the latest firmware.
MST also allows users to transfer data collected on their MS2711E to a PCs for post-processing analysis.
More stories
Compact, battery-operated analyser for field use
Anritsu has introduced the MT8222B BTS Master, a handheld base station analyser that supports 4G standards as well as installed 2G/3G networks, for use by field engineers and technicians.
Field test locates passive intermodulation source
The MW8219A PIM Master field test solution is designed to accurately and quickly locate the source of passive intermodulation (PIM), whether at the base station or in the surrounding environment.
Instrument tests base station transmitter quality
Anritsu has introduced what is said to be the first measurement suite for handheld analysers that measures the RF, modulation and over-the-air (OTA) parameters of TD-LTE eNodeB radio transmitters.
Tool enables evaluation of active optical devices
Anritsu's MP2100A/01A-090 Bit Rate Expansion option for its Bertwave MP2100A series enables the evaluation of various active optical devices from 125Mb/sec to 12.5 Gb/sec.
Micro-OTDR allows installation of optical networks
Anritsu has launched the Network Master MT9090A Micro-OTDR for the installation and maintenance of optical networks.
