Immunity tester is stand-alone system
Teseq
NSG 4070
Signal generator and immunity test system are combined in a compact package for both conducted and radiated immunity testing.
New from Teseq (formerly Schaffner Test Systems), the NSG 4070 is a multifunction test system for both conducted and radiated immunity testing.
The NSG 4070 is an advanced combination of signal generator and immunity test system in one compact unit.
The simple-to-use menu-driven test routines and firmware make the NSG 4070 a complete, stand-alone test system for laboratory use.
Test setup and results are displayed on a 5.7in colour display, and multiple equipment under test (EUT) monitoring options are available.
Where required, optional remote control software is available for control from an external PC or integrated test system.
A port on the front panel allows simple transfer of test and measurement results on to a USB memory stick for archive or further processing.
The integrated signal generator has a wide frequency range from 9kHz to 1GHz available from its 75W internal amplifier.
For maximum flexibility additional external amplifiers may be connected to cover a wide range of applications including tests to IEC61000-4-6, many BCI applications and using the internal four channel power meter, tests to IEC61000-4-3, IEC61000-4-2 and IEC61000-4-21.
Paul Dixon, Managing Director of Teseq comments: "Our new NSG 4070 offers a complete, simple to use, EMC test system".
"It provides comprehensive testing in a very compact and cost effective package, with a high degree of future proofing".
"It also adds to the wide range of test products we offer that can be assembled into larger, integrated test systems or complete laboratories".
A very wide range of coupling/decoupling networks are available for EN6100-4-6 testing and a number of different probes and clamps for RF conducted immunity testing offer reliable methods of current injection and measurement.
For higher power test requirements the Teseq CBA range of power amplifiers extends to 1GHz at up to 1000W (saturated output power).
Teseq offer worldwide support and calibration of all its EMC test equipment, accredited to national and international standards.
Request more information
More stories
Teseq offers digital EMC/EMI receiver module with 18GHz frequency range for FCC testingweblink
Teseq has introduced a digital EMC/EMI receiver module that extends the frequency range of the PMM 9010 receiver system from 6 to 18GHz, making it suitable for a wider range of EMC testing in commercial test labs and in-house manufacturers’ test facilities, according to the company.
Teseq introduces power meter offering 65dB dynamic range and 16ms measurement speedweblink
Teseq has introduced the PMU 6003 power meter, which connects to a PC via a USB port and is designed for a variety of applications over the frequency range of 9kHz to 3GHz.
Teseq coupling clamp connects mains lines and Burst/EFT pulses to data linesweblink
The CDN 3425 Burst/EFT coupling clamp from Teseq is designed to couple Burst/EFT pulses to data lines and can be used to couple to mains lines where no CDN is available.
Product brochure: Teseq's CDN 3425 Burst/EFT coupling clampdownload
Teseq has released the CDN 3425 Burst/EFT coupling clamp, which is designed to couple burst/EFT pulses to data lines.
Teseq supplies common mode absorption devices for reproducible emissions measurementsweblink
The common mode absorption device (CMAD) 20A from Teseq is a line termination clamp that can be used for reproducible emissions measurements.
