XP Power DC/DC converters are aimed at military-vehicle and avionics applications
XP Power
XP Power has introduced the MTC35 and MTC50 series of commercial off-the-shelf (COTS) 35W and 50W DC/DC converters, which are aimed at a range of military-vehicle and avionics applications.
These robust and encapsulated board-mounted modules accommodate an input range from 10 to 40V DC and can handle transients up to 50V DC for up to 100msec.
Output modules are available with 3.3, 5, 12, 15 or 28V DC outputs and can be adjusted between -20 and 10 per cent via an external trim pin.
The systems comply with MIL-STD 1275A/B/C/D and MIL-STD 704A standards for surges and transients, and MIL-STD 461E/F for conducted emissions and susceptibility.
Key specifications
- Meet environmental MIL-STD 810F specification
- Baseplate cooling
- -40°C to 100°C operating temperature
- Unit start-up is possible from as low as -55°C
- Control and signal pins provide the ability to inhibit output, provide thermal warning and converter shutdown, and synchronise converter frequency to an external source in the 400–500KHz range
- Remote sense compensates for up to a 0.5V DC drop on the output
More stories
Compact 10W DC/DC converter meets medical specification for patient connected equipment
XP Power has introduced the JHM10 series of board-mounted, isolated 10W DC/DC converters, which are suitable for use in patient-connected medical applications where voltage isolation must be high, isolation capacitance low and leakage current also low.
Power metal-cased DC-DC converters aimed at space-constrained, portable applications
XP Power’s 20W JCM20 and JTK20 power metal-cased DC-DC converters are aimed at space-constrained, portable applications, as well as those where PCB space for the converter needs to be kept to the minimum and an industry-standard package pin out is required.
DC/DC converters suit most operating environments
XP Power has added to its range of ultra-compact low-power DC/DC converters with the 15W JCM15, available in a 1 x 1in metal package, and the 30W JCK30, available in a 2 x 1in metal case.
IS series DC/DC converters are ultra compact
XP Power has announced the availability of its ISF, ISG and ISL series of low-cost miniature surface-mount DC/DC converters.
XP extends PCB-mount DC/DC converter range
XP Power has announced the latest additions to its range of encapsulated PCB-mount, ultra-compact DC/DC converters.
