PoE splitter powers network devices
Phihong
POE21-240 splitter
Phihong has developed a 21W Power-over-Ethernet splitter that provides 24V at 0.875A for powering security cameras, wireless network access points, IP telephones and IP print servers.
Designated the POE21-240 Series, the Gigabit-compatible splitter divides the power and data and converts the PoE source to a regulated DC power source.
It is designed to be mounted adjacent to an Ethernet device and is designed with the same detection and overload features specified in IEEE 802.3af standards.
'Our splitter products, including the POE21-240, which is designed to work with our POE36U-1AT single port midspan, allow powered devices to be installed into locations without requiring an electrical outlet and UPS local to the device,' said Keith Hopwood, vice-president of marketing for Phihong USA.
Available in a non-vented case with 10Base-T, 100Base-T and 1000Base-T data rates and a UNH IOL test report, the Power-over-Ethernet splitter has an LED to indicate it has power.
The device also has full OCP and OVP protection.
The splitter is isolated from the PoE source by 1,500V AC and meets UL LPS and SELV output requirements.
More stories
Phihong develops gigabit-compatible 21W splitter
Phihong has developed a 21W splitter that has outputs of 10W over Power-over-Ethernet (PoE) to a powered device such as an IP camera and 12W DC to an accessory device such as a heater or illuminator.
Linear Technology offers DC/DC converter suitable for point-of-load applications weblink
The LTC3613 high-frequency controlled on-time synchronous step-down DC/DC converter from Linear Technology offers differential output voltage sensing, clock synchronisation, a 4.5–24V input range and integrated N-channel MOSFETS that deliver continuous load currents of 15A at output voltages from 0.6–5.5V.
Data sheet: LTC3613 synchronous step-down switching regulator from Linear Technology download
The LTC3613 from Linear Technology is a monolithic synchronous step-down switching regulator capable of regulating outputs from 0.6V to 5.5V with up to 15A of output current.
Linear Technology DC/DC µModule converters mitigate ground loops in industrial equipment weblink
The LTM8047 and LTM8048 1.5W-output DC/DC µModule converters from Linear Technology are suitable for applications including industrial sensors, industrial switches and ground loop mitigation in industrial, avionics and instrumentation equipment.
Data sheet: LTM8047 DC/DC µModule converter from Linear Technology download
The LTM8047 from Linear Technology is a DC/DC µModule converter that is suitable for industrial sensor, industrial switch and ground loop mitigation applications.
