Aimtec converters have dual separated outputs
Aimtec
AM1L-NZ and AM2L-NZ
Aimtec has expanded its 1W and 2W DC-DC surface mount product line with dual separated output models.
These models for the AM1L-NZ (1W) and AM2L-NZ (2W) series are offered with input voltages of 5V or 12V DC and either step-up or step-down to dual separated outputs of 5/5, 9/9, 12/12 or 15/15V DC.
Such dual separated output configurations allow for rapid and dramatic load changes on the two outputs (from 10 per cent to 100 per cent load current) without any degradation to load regulation of either output.
Additional protection from interaction/interference between load circuits is also a feature of dual separated output.
Should there be concerns about conducted EMI signals originating from one or both load circuits, the isolation on the converter's outputs will help prevent the EMI signals from being conducted to the other load circuit.
Producing output currents of up to 200mA, with input/output isolation of 1,000V DC, at efficiency rates up to 85 per cent allows these converters to help maximise battery lifetime and minimise unwanted heat generation.
Designed within a low-profile (17.78mm x 17.78mm x 6mm) package, the AM1L-NZ and AM2L-NZ operate within a temperature range of -40C to +85C at full power without derating or forced air cooling, with a start-up temperature of -40C, making them suitable for outdoor applications.
More stories
1W power supplies offer efficiency of 89 per cent
Aimtec has broadened its product line with the addition of the AM1D-RZ series of 1W power supplies, featuring 80 models with efficiency rates up to 89 per cent and load regulation of six per cent.
Aimtec power supplies offer auto-recovery restart
Aimtec has launched the AM1DS-NZ series of 1W power supplies, featuring continuous short-circuit protection with auto-recovery restart and suitable for a range of applications.
DC/DC converters suit battery-powered applications
Aimtec's DC/DC converters offer the flexibility required for applications with loosely regulated inputs or battery-powered applications where input voltages can vary greatly with the battery levels.
DC/DC power converters suit portable applications
Aimtec has launched the AM10TW-Z series of 10W DC/DC power converters with an operating temperature range of -40C to +85C for indoor/outdoor use in a multitude of applications.
DC/DC converters suit portable power applications
Aimtec has extended its SIP8 product line with the addition of the AM3GH-Z series of single and dual output buck DC/DC converters for a variety of industrial and portable power applications.
