Schroff adds 6U model to power-supply range
Schroff UK Ltd
Maxpower Pro power supplies
Schroff has expanded its 19in Maxpower Pro range of switched-mode power supplies with the addition of a 6U model designed for high-power Compact PCI applications.
Featuring an output of 500W, the 13100-145 power supply operates from an input voltage range of 90 to 264V AC with PFC and delivers output voltages of 5, 3.3, 12 and -12V.
As well as incorporating a P47 connector conforming to the PICMG 2.11 Compact PCI specification, the PSU provides the high levels of reliability demanded by typical Compact PCI applications in the communications, industrial, military and aerospace sectors.
Inputs are protected against voltage transients and high-inrush currents, outputs are protected against open-circuit and short-circuit conditions, and the power supply includes over-temperature protection.
The unit is hot-swap capable and active current sharing is provided on three of the outputs for parallel operation of multiple units in n+1 redundant designs or in systems requiring a higher output power.
Measuring 6U high by 8HP wide by 172mm deep, the PSU is supplied with an EMC seal and a 19in front panel, including handles.
It achieves a typical efficiency of 84 per cent and meets the requirements of the relevant standards covering safety, EMC and mechanical stress.
More stories
Data sheet: Martek AW/RW series convertersdownload
The Martek AW and RW series are ranges of AC/DC and DC/DC converters suitable for military applications.
Data sheet: Martek HM series rectifiersdownload
Martek’s HM series consists of front end rectifiers with 300–900W output.
Data sheet: Martek NW25S power supplydownload
The Martek NW25S is an AC/DC and DC/DC power supply.
Fault-tolerant power systems from Unipower support applications such as high-end servers
Unipower has introduced five fault-tolerant power systems designed to support high-end servers, communications equipment and other applications that require a redundant power solution.
TDK-Lambda extends AL range of LED power supplies for lighting and signage applications
TDK-Lambda has added three power levels to its AL series LED AC/DC power supplies, which are designed for next-generation LED lighting and signage applications that require high power and a high level of reliability.
