Sign up for newsletters

PSC-100 has battery charging capabilities

Ecopac Power

Mean Well PSC-100 power supply

The Mean Well PSC-100 series from Ecopac is a cost-effective, open-frame power supply with battery charging capabilities.

In addition to the main output, the PSC-100 also has a charger facility to allow for monitoring or battery-backup related applications.

The PSC-100A will fully charge a 12V 15Ah battery and the PSC-100B will fully charge a 24V 7.5AH battery within four hours.

The PSC-100 series is supplied with full alarm signals including AC OK and battery-low alarm and can be driven by any external DC voltage from 4V up to 50V with a 30mA maximum load.

If the main power source is interrupted, the PSC-100 switches to battery backup mode, and a TTL signal will be sent out to a monitoring unit to warn of impending unit failure.

If the battery voltage goes down to 11V (for 12V battery bank) or 22V (for 24V battery bank), another TTL alarm signal will be sent out to warn of the 'battery low' situation.

The battery backup loop will be cut off when the battery voltage goes down to 10.5V or 21V to prevent batteries from over-discharging.

The Mean Well PSC-100 series can operate up to 70C of high ambient temperature with only free air convection.

Protection for PSC-100 includes short-circuit, overload, and over-voltage protection for the output side.

For the battery side there is battery polarity protection (by fuse) and battery low cut-off.

The Mean Well PSC-100 series is supplied with worldwide safety certificates, UL, CUL, TUV, CE, and CB.

Applications include the security industry, emergency lighting systems, UPS systems, central monitoring systems and automatic door systems.

Related images

  • 345526_1.jpeg

Request more information

Sign in | Register

Mandatory Required Fields.

Mandatory
Request more information

Add to my alerts

You need to be logged in to add alerts.

Sign in
Source footer