Power supplies target applications in LED signage
TDK-Lambda
ZPSA100
TDK-Lambda's ZPSA100 is suitable for applications such as LED signage and lighting, point-of-sale equipment, datacom, video/audio routers, and test and measurement equipment.
The compact 100W PCB-mountable AC-DC power supply accepts a wide input voltage range and has a 26.6mm profile and industry-standard 127 x 76.2mm footprint.
These 100W supplies are available with the most popular single-output voltages from 5 to 48V DC.
Offering a typical efficiency of up to 90 per cent, these models are suited for operation in convection or customer air-cooled environments from 0 to 70C, with appropriate derating.
A green LED is provided as an indicator that the power supply is on and other standard features include over-voltage and short-circuit protection.
These supplies are offered in an open-board configuration with Molex input/output connectors.
Accepting an input-voltage range of 90-264V AC (47-440Hz) or 120-370V DC, the ZPSA100 series is ready for use globally with no further configuration or input selection.
Its industry-standard footprint makes it suitable as a drop-in replacement for existing supplies, while its low profile means that it can be installed in compact applications.
TDK-Lambda's ZPSA100 series is approved to national and international safety approvals, including IEC/EN/UL/CSA60950-1 (edition 2), meets conducted and radiated EMC requirements of EN55022-B and FCC Class B (without additional filtering or components), and meets EN61000-4 immunity specifications for greater reliability.
All models in the ZPSA100 series carry the CE mark, according to the LV Directive, and come with a two-year warranty.
More stories
TDK-Lambda extends AL range of LED power supplies for lighting and signage applications
TDK-Lambda has added three power levels to its AL series LED AC/DC power supplies, which are designed for next-generation LED lighting and signage applications that require high power and a high level of reliability.
AC/DC power supplies have long capacitor life
TDK-Lambda UK has extended its ZWS-BAF series of PCB-type AC/DC power supplies by adding two lower-power models, suitable for use in factory automation, test and measurement and LED signage.
AC/DC power supplies can be used in LED signage
TDK-Lambda's ZWS-BAF series of PCB-type AC/DC power supplies is designed to meet the demands of a range of applications, including factory automation, test and measurement, and LED signage.
TDK-Lambda introduces 400W medical power supplies
TDK-Lambda EMEA has extended its range of EFE digitally controlled medical power supplies with the introduction of the 400W EFE400M Medical range.
Power supplies suit budget-conscious applications
The LS200 line of power supplies is suited to budget-conscious applications but is also said to offer more functions than similarly priced products available on the market and can fit into a 1U rack.
