Power supplies can be provided in 2U rack mount
Safety Power
VE3PUI power supplies
Safety Power has launched a range of high-quality 3,000W analogue power supplies that can be supplied in 2U rack mount or as an installation unit for mounting-board assembly applications.
The VE3PUI is available in six single-output models, offering DC voltages from 0 to 30V at 0 to 125A, 0 to 52V at 0 to 75A, 0 to 60V at 0 to 63A, 0 to 90V at 0 to 42A, 0 to 150V at 0 to 25A and 0 to 300V at 0 to 12.5A.
Input is 415V AC, three-phase, 45 to 66Hz.
The supplies offer constant-voltage, constant-current and constant-power modes programmed via 0 to 5V analogue signal with monitoring for voltage, current and power via standardised-value 0 to 5V analogue-signal outputs from front-panel measuring sockets.
Standard features include remote on/off and power-fail (PF) signal, and each power supply is fitted with quick-release coded connectors for the mains and outputs, to ensure correct connection.
Options include a separate programming and monitoring interface via a D-sub connector on the rear panel.
This includes PF signal, load-share (LS) bus, remote on/off, over-temperature alarm, voltage and current programming (0 to 5V DC), and voltage and current read back (0 to 5V DC).
A green, back-lit display showing voltage and current can be fitted if required.
Measuring 436 x 284 x 86mm, each VE3PUI power supply is designed to meet EN60950 and EN55011/22 class B standards, and comes with a three-year warranty as standard, plus a 48hr burn-in test to ensure high reliability.
More stories
DC programmable power supplies offer stable output
Safety Power Group has launched a range of high-quality 6000W DC programmable power supplies for bench- or rack-mount test and measurement applications offering stable voltage or current output.
1.6kW power supplies offer high power density
Safety Power Group has launched a range of 1.6kW power supplies for bench- or rack-mount applications offering high power-density rating in a 1U, 19in rack package.
SPG power supplies offer 1200W output power
Safety Power Group has launched a range of single-output embedded programmable power supplies, offering 1200W output power with various voltage and current ranges.
National Instruments' PXIe-1066DC chassis for test, measurement and control weblink
The18-slot PXIe-1066DC chassis from National Instruments has been designed to improve the system-level mean time before failure and mean time to repair of PXI systems in deployed, mission-critical test, measurement and control applications.
Data sheet: Martek AW/RW series converters download
The Martek AW and RW series are ranges of AC/DC and DC/DC converters suitable for military applications.
