AC/DC power supplies have long capacitor life
TDK-Lambda
ZWS-BAF power supplies
TDK-Lambda UK has extended its ZWS-BAF series of PCB-type AC/DC power supplies by adding two lower-power models, suitable for use in factory automation, test and measurement and LED signage.
The 50W ZWS50BAF and 75W ZWS75BAF are designed to combine high efficiency at low-load conditions with a wide operating temperature range, small size and up to 10 years of electrolytic capacitor life.
As with all models in the ZWS-BAF series, the new low-power models have active power factor correction (PFC) and high-input transient and surge protection to IEC61000-4-4,5.
They operate from a universal input of 85-265VAC or 120-370VDC, making them suitable for a wide range of applications, including factory automation, test and measurement and LED signage.
Offered with a choice of output voltages from 3.3V to 48V, each model in the ZWS-BAF series can be adjusted by up to +/-10 per cent of its nominal voltage to accommodate non-standard system voltages.
Small in size and offering an efficiency of up to 88 per cent, all models in the ZWS-BAF series feature an operating temperature range of -10C to 70C, allowing 100 per cent load operation in a 50C environment.
Standard features include over-current and over-voltage protection circuitry, while an optional remote on/off is also available.
With active PFC that meets EN61000-3-2, the ZWS-BAF models have a 3kVAC input-to-output isolation and meet conducted and radiated EMC conforming to EN55011/EN55022-B, FCC-B, VCCI-B.
They are delivered with TDK-Lambda's five-year warranty, are safety approved to UL/CSA/EN60950-1 and EN50178 and carry the CE mark, according to the LV Directive.
More stories
TDK-Lambda extends AL range of LED power supplies for lighting and signage applications
TDK-Lambda has added three power levels to its AL series LED AC/DC power supplies, which are designed for next-generation LED lighting and signage applications that require high power and a high level of reliability.
Power supplies target applications in LED signage
TDK-Lambda's ZPSA100 is suitable for applications such as LED signage and lighting, point-of-sale equipment, datacom, video/audio routers, and test and measurement equipment.
AC/DC power supplies can be used in LED signage
TDK-Lambda's ZWS-BAF series of PCB-type AC/DC power supplies is designed to meet the demands of a range of applications, including factory automation, test and measurement, and LED signage.
TDK-Lambda introduces 400W medical power supplies
TDK-Lambda EMEA has extended its range of EFE digitally controlled medical power supplies with the introduction of the 400W EFE400M Medical range.
Power supplies suit budget-conscious applications
The LS200 line of power supplies is suited to budget-conscious applications but is also said to offer more functions than similarly priced products available on the market and can fit into a 1U rack.
