LED-based streetlight offers illuminating results
Everlight Electronics
LED-based SL-Dolphin streetlight
Everlight Electronics' LED-based SL-Dolphin streetlight will illuminate two streets in Prague as part of a pilot project that tests streetlights based on LED technology.
The four-month-long test series aims to gather experience with and information on seven LED streetlights of six different suppliers.
All seven streetlights have been installed in topographically different environments and are fulfilling different tasks, ranging from lighting park walkways and bicycle paths to bright shopping streets or dark residential avenues.
The selected streets and tracks are all located close to the city centre in frequently visited tourist areas.
The street lights will remain in operation for the foreseeable future.
Everlight (via distributor MSC-Vertriebs-CZ) has been assigned two streets, located in residential areas characterised by only few additional light sources such as a bright shop-window light.
The result of previous analysis was that Everlight's 120W and 90W SL-Dolphin Phoenix streetlights proved best in series for these conditions.
Another demanding condition was that the five streetlight poles were installed on only one side of the road with 35-40m between each pole.
In spite of these obstacles, the SL-Dolphin achieved good lighting values in the first evaluation round.
The SL-Dolphin not only provided uniform illumination across the entire street width, but also illuminated the opposite sidewalk according to current standards.
More stories
Everlight Electronics offers 'smart binning' for Shuen and Shwo high-power LED series
Everlight Electronics is offering a three-step MacAdam Ellipse binning of all warm white colour temperatures, including 2,700K, 3,000K, 3,500K and 4,000K CCT, for the Shuen (C06) and Shwo (C19) high-power lighting LED series.
Everlight introduces chip-on-board LED series
Everlight Electronics has introduced a new chip-on-board (COB) LED series that is suitable for 40W and 60W A-bulb replacement, recessed lighting and other indoor general lighting applications.
High-voltage LEDs suitable for retrofit lamps
Everlight Electronics has launched a range of high-voltage LEDs especially suited for use in solid-state lighting integral lamps - or retrofit lamps.
LED for outdoor signage display applications
Everlight Electronics has launched the Hong LED series HNB503, a full-colour surface-mount optoelectronics component, designed for outdoor LED signage display applications.
Yi LEDs target advanced lighting applications
Everlight Electronics has introduced the Yi series of high-power, high-brightness and economic LEDs designed for use in applications such as general, indoor and outdoor and commercial lighting.






