Connectors now accept wires up to 14 AWG
Binder
Series 713 M12
Binder is now offering M12 and 7/8in field-attachable connectors with larger screw clamp terminations, enabling them for connecting power applications typically found in industrial environments.
This change will allow the connectors to accept wires up to 14 AWG.
The Series 713 M12 connectors with four and five pins can now be terminated with 16 AWG wires and a maximum cable diameter of 10mm.
After increasing the wire gauge it is possible for the connectors to conduct currents up to 8A per contact.
Both male and female versions are available in straight form and are intermateable with all four- and five-pin A-coded versions.
The Series 820 7/8in connectors with five pins can now be terminated with 14 AWG wires and a maximum cable diameter of 14mm.
By increasing the size of the cable clamps it is now possible for the connectors to withstand currents up to 12A per contact.
Male and female connectors with straight and angled forms are available with the larger screw terminations.
All Binder M12 and 7/8in connectors are IP67 rated when connected to their mating parts.
Binder offers mating cordsets, receptacles and field-attachable connectors for a complete connecting system.
More stories
Binder-USA expands range of overmoulded connectors
Binder-USA, a manufacturer and supplier of connectors and cordsets, has added a knurled and hex threaded locking ring nut to the M12 Series 763 and 766 overmoulded connectors.
High-power M12 connectors for industrial sensors
Binder has launched high-power versions of the M12 connectors for applications in industrial sensors, instrumentation, automation systems and similar equipment.
Enhanced sensor connector seals to IP67 rating
Binder-USA, has improved its M8 over-moulded sensor connector by adding a knurled and hex locking nut, which allows the connector to be tightened with a torque wrench to ensure proper mating.
Connectors enable fitting 8-12mm diameter cables
Binder has added PG11 and PG13.5 cable outlets to its line of RD24 Series 692 and 693 right-angle connectors, which have IP67-rated protection and are suitable for industrial power applications.
Binder adds rear-mount receptacles to M8 range
Binder has added rear-mount potted receptacles, which are said to be suitable for use with industrial sensors, to its line of M8 connectors.
