Turnkey lines enable in-house PCB assembly
Manncorp
Flex Line turnkey system
Manncorp has expanded the top end of its turnkey lines in response to increased interest from OEMs aiming to cut costs by bringing PCB assembly in-house.
The two new systems are the high-throughput Flex Line, which includes twin MC-385 pick-and-place machines with a combined placement rate of 10,000cph, and the Box Builder Line, with the MC-387 placer that houses a 224-feeder capacity.
The Flex Line enables assemblers to increase throughput by balancing their line.
This is achieved by incorporating both pick and place machines - each IPC9850-rated at 5,500cph and capable of placing parts ranging from 0201 up to 150 x 100mm.
The Flex Line also includes the MC-1400 automatic stencil printer, the CR-8000 eight-zone lead-free reflow oven and two conveyors to link the placers and permit pre-reflow inspection.
The Box Builder Line, with its pick and place having an IPC9850-rated speed of 5,500cph, is particularly suitable for short-run assemblers who require abundant feeder capacity.
This asset allows the machine to be programmed for multiple processing scenarios without changeovers and downtime.
Rounding out this turnkey are the MC-1400 automatic stencil printer, the CR-5000 five-zone lead-free reflow oven and the CT-90L inspection conveyor.
More stories
Manncorp offers LED-enabled pick-and-place system
Manncorp has launched the MC-392LED LED-enabled pick-and-place system, which is said to be suitable for populating extra-long LED panel assemblies in a single pass.
Desiccant cabinets prevent component defects
Manncorp has launched a value line of lower-priced desiccant cabinets, featuring three models with internal capacities of 7, 22 and 44ft3, to prevent defects to components and assemblies.
Wave solder machine for mid-volume applications
Manncorp has introduced system 16.350, a wave solder machine with a footprint of 1,675mm long, to satisfy requests from mid-volume customers.
Manncorp turnkeys have range of throughputs
Manncorp has introduced seven electronic-assembly turnkey lines with throughput rates ranging from prototyping to 10,500cph.
Pick-and-place system has cut-strip feeders
Manncorp has introduced a pick-and-place system aimed at OEMs who wish to prototype and perform short-run PCB assembly in house.
