Manncorp offers LED-enabled pick-and-place system
Manncorp
LED-enabled pick-and-place system
Manncorp has launched the MC-392LED LED-enabled pick-and-place system, which is said to be suitable for populating extra-long LED panel assemblies in a single pass.
Through the use of the low-cost, optional CT-150 conveyor extension unit, the machine becomes capable of two-stage assembly of oversized LED boards of up to 1.2m (47.25in) long.
It features a dual-head placement rate of 6,400cph and offers reliability in SMD placement.
Other features include balls-screw X-Y drive and closed-loop servo control with linear encoding for placement accuracy of 30um, 3 Sigma.
The 392's vision system is Cognex-based for 'on-the-fly' alignment of any SMD from 0.4 x 0.2mm to 16 x 14mm, including CSPs and uBGAs.
Optional upward-looking vision cameras align components up to 150 x 100mm, including large BGAs and QFPs to 0.3mm (0.012in) lead pitch.
A vision inspection capability allows a camera to selectively check solder paste printing and component placement accuracy.
The MC392LED joins the larger MC-388LED, another Manncorp LED-enabled placer with 192 tape feeder capacity, which enables it to assemble LED panels of up to 1.2m (47.25in) in a single pass without the need for a conveyor extension.
More stories
Desiccant cabinets prevent component defects
Manncorp has launched a value line of lower-priced desiccant cabinets, featuring three models with internal capacities of 7, 22 and 44ft3, to prevent defects to components and assemblies.
Turnkey lines enable in-house PCB assembly
Manncorp has expanded the top end of its turnkey lines in response to increased interest from OEMs aiming to cut costs by bringing PCB assembly in-house.
Wave solder machine for mid-volume applications
Manncorp has introduced system 16.350, a wave solder machine with a footprint of 1,675mm long, to satisfy requests from mid-volume customers.
Manncorp turnkeys have range of throughputs
Manncorp has introduced seven electronic-assembly turnkey lines with throughput rates ranging from prototyping to 10,500cph.
Pick-and-place system has cut-strip feeders
Manncorp has introduced a pick-and-place system aimed at OEMs who wish to prototype and perform short-run PCB assembly in house.
