Hitex unveils Speedflash-XC programming software
Hitex Development Tools
Speedflash-XC
Hitex Development Tools has launched Speedflash-XC, a programming solution for users starting the production of Infineon 16-bit microcontroller-based designs.
Speedflash-XC can be integrated in the production environment (end of line) and allows the connection of up to eight Speedflash-XC probes to needle bed production equipment via JTAG or DAP.
To obtain the production data, the probes are connected to the production computer via USB.
The Speedflash-XC software can be used in batch operation using the command line mode or via a DLL that can be integrated in a supervision production flow environment.
The Speedflash-XC's production cycle typically consists of the following steps: contact product, erase Flash, program Flash, verify Flash content and, if necessary, protect Flash.
A complete recording of the production flow for production documentation is provided.
Since production speed matters particularly with regard to high quantities, the production cycle is optimised so that cycle times of approximately three seconds can be achieved with up to eight parallel produced microcontrollers (by programming 128KB).
Speedflash-XC supports the complete range of Infineon's XC66/XC2000/XE166 microcontroller derivatives.
More stories
Software library created for NXP microcontrollers
Hitex Development Tools has developed a self-test software library for NXP's Cortex-M3-based LPC1000 range of microcontrollers to meet the IEC 60335 standard for automatic electronic controls.
Visionpro from Cognex enables laser marking specialist to ensure component traceability weblink
Asys Automatisierungssysteme, a laser marking specialist based in Dornstadt, Germany, has incorporated Cognex’s Visionpro vision software into its Insignum 2000 laser marking system to ensure complete component traceability.
Rittal software provides support for planning and verification of low-voltage switchgear weblink
Version 6.0 of Rittal’s Power Engineering software is designed to provide support for the planning and verification of standardised Ri4power switchgear, as well as low-voltage switchgear consisting of the TS 8 enclosure system and the Riline60 modular busbar system.
B and R works with Eplan to create seamless interface between development tools weblink
B and R and Eplan have developed a seamless interface between the B and R Automation Studio and Eplan Electric P8 development tools, which are suitable for mechanical, electrical and software engineering.
Rittal offers calculation software for choosing efficient enclosure climate control weblink
Rittal’s Rittal Therm calculation programme enables users to find the most efficient means of climate control for their enclosures.
