Ronetix announces firmware update
Ronetix
JTAG/BDM Emulator and Flash programmer
Ronetix has announced the availability of the new firmware of its high-speed JTAG/BDM emulator and Flash programmer.
The firmware adds support of debugging and Flash programming of Cortex-M3 and Cortex-A8 ranges from ARM.
PEEDI can be used for high-speed GNU GDB debugging and Flash programming of all ARM7, ARM9, ARM11, Cortex-M3, Cortex-A8, Xscale, Freescale Nexus-enabled PowerPC MPC55XX, MPC83XX, Coldfire and Blackfin-based CPUs.
With its built-in GNU GDB support, PEEDI can be used with any GNU GDB-based debugger without any additional software, which makes PEEDI host operating system independent.
The built-in Flash programmer of PEEDI supports programming of over 900 NOR Flash devices and 8-bit and 16-bit NAND Flash devices connected to the CPU via the JTAG interface.
PEEDI supports the programming of the internal Flash memory of the ST STM32 and Luminary Micro LM3S families.
PEEDI offers various methods for ECC calculating including bad block management and clean markers.
It supports several Flash profiles, which enables the programming of a complete Linux system at once.
More stories
Solid State Supplies introduces development kit for XBee range of embedded Wi-Fi modules
Solid State Supplies has introduced a development kit for the XBee range of flexible embedded Wi-Fi modules.
Cypress Semiconductor offers development kit for PSoC system-on-chip architectures
Cypress Semiconductor has launched the CY8CKIT-025 Development Kit for its PSoC 3 and PSoC 5 programmable system-on-chip architectures.
Verotec system provides basic physical environment for software development
Verotec has introduced the Tecsys VPX development platform, which is designed to provide a basic physical environment for software development and board integration.
IAR Kickstart Kit can be used within automotive control unit applications
The IAR TMPM350FDFTG Kickstart Kit from Toshiba Electronics Europe can be used in the design, development, integration and testing of automotive electronic control unit applications that are required to comply with ISO 26262 functional safety standards for road vehicles.
RS Components offers discovery kit and microcontrollers from STMicroelectronics
RS Components is now offering a discovery kit that is said to enable engineers to start designing into applications using the STM32F4 series of ARM Cortex-M microcontrollers.
