Easy-to-use, economical PoE boards
Saelig
TEK-PoE 2 DC-12W
Saelig has introduced a range of economical Power-over-Ethernet (PoE) boards, with regulated DC output, which allow remote device operation and control without the need for a local power source.
TEK-PoE 2 DC-12W is a PoE power source that delivers regulated DC power for Ethernet-connection of devices that are not PoE-ready.
It uses standard PoE switches, cables and RJ45 connectors, delivering regulated DC output at a user-selected level of 5V, 9V, 12V or 24V, and passing a 10/100base-T Ethernet connection through to the output jack.
A keep-alive circuit provides a minimum load to keep the PoE source connected under no-load conditions.
PoE-2-RS232-12W is a PoE serial adapter/converter that provides Ethernet-to-serial data conversion and high-efficiency local power from Ethernet cable when sourced by 802.3af-compliant Power Sourcing Equipment (PSE).
This serial-to-Ethernet cable adapter can quickly and easily be connected to any device with a serial port connection, making it immediately web-enabled.
Functioning as a single-serial-port server, PoE-2-RS232-12W converts a serial port to an Ethernet port, removing the length limitations imposed by RS232 communication cables.
PoE-2-Input-12W is a digital monitor/DC-DC converter that provides remote Ethernet monitoring for up to 16 digital Inputs with local power derived from a PoE cable.
This networked device monitor can quickly web-enable any 5V digital device.
This digital monitor can therefore report status, time, temperature, alarm, or any other information from anywhere directly to a PC.
Additionally, it can deliver regulated DC power for an additional non-POE device, locally converting up to 48VDC down to 3.3-12VDC for non-POE devices.
PoE-2-Relay-8-12W is a relay output and local DC-DC converter that offers remote Ethernet switching control of up to 30A per device on eight different relay channels on a PoE Ethernet connection.
This versatile Ethernet-switching controller can quickly and easily allow web-control of up to eight 30A loads.
In addition, PoE-2-Relay-8-12W features a power extraction accessory that can deliver regulated DC power for a secondary non-POE device.
PoE-2-Relay-8-12W makes it easy to remotely switch a load under software control.
A software development kit is also available for developing customised applications for these PoE boards.
More stories
Device transfers data between USB3.0 and SATAII
The PL2771 single-chip Superspeed USB3.0 to SATAII-compliant bridge controller is designed to perform seamless data transfer between USB3.0 and SATAII devices.
Mixed-signal oscilloscope for in situ testing
Saelig has introduced Xprotolab, a mixed-signal oscilloscope that can be mounted directly on a breadboard or pcb for in situ testing and verification.
PC-based tools complement system debug equipment
Saelig is offering GP-24116 and GP-24132 general-purpose and expandable PC-based tools that complement existing system debug equipment such as logic analysers and high-speed oscilloscopes.
Saelig PDFs detail electronics product portfolio download
Electronic control and instrumentation expert Saelig has made available two PDF documents detailing its wide offering of cables, components, displays, data loggers and more from leading manufacturers.
Logic analyser and signal generator in one package
Saelig has introduced Scanalogic2, a compact, PC-based, four-channel logic analyser and signal generator in a single economical package.
