Torex introduces XC8102 Series switching device
Torex Semiconductor
XC8102 Series
Torex Semiconductor has introduced the second-generation XC8102 Series low supply current line switch IC, which features a number of enhancements over the XC8101 Series.
Available in the ultra-small USP-4 package, as well as in standard SOT-25 and SSOT-24 versions, the device does not require any external capacitors and is, therefore, suitable for space-critical designs such as those in handheld, battery-powered applications.
Andy Scott, marketing manager for Torex Semiconductor in Europe, said: 'The second-generation XC8102 Series addresses a wider range of applications.
'We've increased IOUT to 400mA from 200mA, lowered the VIN range to 1.2V minimum from 1.8V and lowered the ON resistance to 0.35ohm [VIN = 2.9V] from 0.75ohm,' he added.
The XC8102 Series contains a current limit and protection circuit so these are not required externally, unlike discrete circuit solutions where Mosfets and resistors are used.
For example, by connecting the XC8102's VIN pin to the output pin of a step-down DC-DC converter, such as the XC9235 from Torex, the line switcher can be used to provide a number of accurate output rails.
The XC8102's CE pin controls the on/off function for each switcher to deliver power as and when needed, thereby optimising efficiency and power consumption.
During the switch into standby mode, the electric charge at the CL capacitor, if used, is discharged via the internal automatic-discharge switch, ensuring that the VOUT pin drops down to ground quickly.
The XC8102 Series contains an over-current protection with fold-back current circuitry, which operates as over-current protection and short-circuit protection for the output pin.
More stories
LDO regulator is housed in ultra-small package
The XC6229 series is a high-speed LDO regulator housed in an ultra-small LGA-4B01 package.
Negative voltage regulators fit small capacitors
The XC6901/02 series from Torex are negative voltage regulators that are compatible with small ceramic capacitors.
High-speed LDO for low input/output applications
Torex has launched the XC6602 series, a high-speed, accurate LDO that can supply up to 1A of output current while consuming 110uA in low input/output applications.
Small voltage detectors with manual reset input
Torex has introduced the XC6127, a range of Voltage Detectors with ultra-low power consumption and suitable for monitoring a wide range of microprocessors in all types of battery-powered applications.
Torex launches high-speed 10.5V LDO regulator
Torex Semiconductor has launched the XC6505 series, a 10.5V LDO regulator that is targeted at applications that require a small form factor and a good amount of power dissipation.
