Linear introduces LTC2635 rail-to-rail DACs
Linear Technology
LTC2635 DACs
Linear Technology's LTC2635 quad 12, 10 and 8bit rail-to-rail digital-to-analogue converters (DACs) integrate a precision 10ppm/C reference in 3 x 3mm QFN and MSOP packages.
Ordering options include 2.5V (LTC2635-L) and 4.096V (LTC2635-H) DAC full-scale outputs.
The LTC2635-L offers power-on reset to zero and mid-scale options.
It also includes ordering options for high impedance outputs at power-on reset and during shutdown.
This allows the DAC to be used in applications such as power-supply margining where the DAC outputs must be electrically isolated from the power supply at power-on, before being called to action to adjust supply voltages up and down.
The LTC2635's small size and internal reference are important for a variety of industrial, automotive and ATE applications.
The LTC2635 offers 12-bit performance of +/-2.5LSB (max) INL error and 3nVs crosstalk, ensuring that a voltage change on one DAC has minimal effect on the other DACs.
Operating from a single 2.7 to 5.5V supply, supply current is a low 125uA per DAC.
In addition to selecting one of three resolution options, designers can also choose between a 2.5 or 4.096V full-scale range, as well as power-up options for zero-scale, mid-scale or Hi-Z.
The 16-pin 3 x 3mm QFN package includes a hardware load-DAC (LDAC) pin, three address pins for selecting 27 unique I2C addresses and a Reflo pin.
The 10-pin MSOP package has just one address pin for selection of up to three unique addresses on the I2C bus.
All LTC2635 options are guaranteed over the automotive (-40C to +125C) and commercial (0C to +70C) temperature ranges.
Pricing begins at USD2.03 (GBP1.31) each in 1,000-piece quantities.
Related images
Request more information
More stories
Data sheet: LTC3617 monolithic synchronous buck regulator from Linear Technologydownload
The LTC3617 from Linear Technology is a high-efficiency monolithic synchronous buck regulator that utilises a current-mode, constant-frequency architecture.
Linear Technology offers DC/DC controller suitable for sectors such as automotiveweblink
The LT3759 DC/DC controller from Linear Technology — which can generate negative or positive output voltages — is suitable for boost, SEPIC and inverting supply applications within sectors such as industrial, automotive, medical and telecom.
Data sheet: LT3759 current-mode DC/DC controller from Linear Technologydownload
The LT3759 from Linear Technology is a current-mode DC/DC controller that is capable of regulating either positive or negative output voltages from a single feedback pin. It can be configured as a boost, SEPIC or inverting converter.
Linear Technology offers frequency synthesiser for applications such as avionicsweblink
The LTC6946 frequency synthesiser from Linear Technology is suitable for improving the performance of multiband basestations that support LTE, W-CDMA, UMTS, CDMA, GSM and WiMAX standards — as well as point-to-point broadband wireless access, military, avionics, and high-performance test and measurement applications.
Data sheet: LTC6946 integer-N synthesiser with integrated VCO from Linear Technologydownload
The LTC6946 from Linear Technology is a low-noise 5.7GHz phase-locked loop (PLL) with a fully integrated VCO, including a reference divider, a phase-frequency detector with phase-lock indicator, an ultra-low-noise charge pump, an integer feedback divider and a VCO output divider. The charge pump contains selectable high- and low-voltage clamps that are useful for VCO monitoring.
