Avnet Memec introduces Maxim protection IC

The DS2726 combines voltage and current monitoring with cell balancing in a single chip and provides a space-saving solution for battery-operated devices.

It is, therefore, an ideal protector for power tools, electric bikes, portable household appliances, battery-backup systems, or any application with a 5- to 10-cell Li+ battery pack.

The DS2726 employs high-side p-channel protection FETs to provide comprehensive overvoltage, undervoltage, discharge-current, and short-circuit protection.

The protection circuit monitors individual cell voltages to detect overvoltage and undervoltage conditions.

Additionally, high-side protection allows the host system to maintain communication with a fuel gauge, such as the DS2788, even when a fault condition causes the protection FETs to switch off.

To further simplify design and reduce cost, the DS2726 eliminates the need for an external microcontroller to configure the device.

Voltage-protection and cell-balancing thresholds are pin-programmable; overdischarge and short-circuit current limits are set with external resistors; and overdischarge and short-circuit current time-out delays are set with external capacitors.

This simple device thus provides robust protection while extending battery life by ensuring that all cells are equally charged.

During cell balancing, internal switches shunt 150mA (typical) of current.

For added flexibility, cell balancing can be enabled automatically on detection of a charger or by signalling a control pin.

The DS2726 is available in a space-saving, 7 x 7mm, 32-pin TQFN package.

Samples and evaluation kits are available to speed designs.