Design software refers to the programs used with computers involved in the creation of products. Includes PLM/PDM, CAD/mechanical design, prototyping, simulation, plant design, and electronic automation and design.
Product & Service Resources
Delcam | Fri, 19 Dec 2014
Delcam will demonstrate the 2015 version of its PowerSHAPE Pro CAD-for-CAM system for modelling for manufacture and reverse engineering at the Pacific Design & Manufacturing exhibition, which is due to be held in Anaheim, California, on 10–12 February.
Cedrat | Wed, 17 Dec 2014
CEDRAT is meeting the challenge of simulating the control of an induction machine using one of its tools: Portunus — a system simulator.
Integrated Engineering Software | Fri, 12 Dec 2014
This paper from Integrated Engineering Software presents an overview of the focusing properties of magnetic quadrupoles and shows how beam spot size can be determined using arc segment emitters. It also shows how parametric variation of the excitation current can be used to determine the optimum level for minimum spot size at points along the beam axis.
Cedrat | Tue, 9 Dec 2014
This paper from Cedrat demonstrates the determination of cut-off frequencies of different proportional electromagnetic actuators in FE simulation under the consideration of eddy currents. The dynamic limits of different concepts thus can be compared in simulation already before the sampling process is started.
DELMIA Apriso | Mon, 8 Dec 2014
This white paper from Apriso introduces the concept of a ‘digital twin’ as a virtual representation of what has been produced. Compare a digital twin with its engineering design to better understand what was produced versus what was designed, tightening the loop between design and execution.
AVX | Thu, 4 Dec 2014
AVX has released a new version of its SpiCalci simulation software, an engineering tool that calculates performance characteristics and parameters of switch-mode power supply (SMPS) capacitors. SpiCalci 9.0 helps design engineers to identify and select the best SMPS capacitor solutions for applications in the military, aerospace, space, automotive, alternative energy, motor drive, oil and gas, power inversion and conversion and supply industries.
Megger | Wed, 26 Nov 2014
The MPRT from Megger can receive analogue signal from the data acquisition boards to be amplified, and then send the signal to the test object.
Cedrat | Tue, 25 Nov 2014
In the study of magnet machines, the research for ultimate control is a fundamental point. For this research, CEDRAT proposes three methods.
Integrated Design and Analysis Consultants | Tue, 25 Nov 2014
ANSYS SpaceClaim is a 3D modelling software system available from IDAC. The 2015 release offers numerous benefits.
Cedrat | Thu, 20 Nov 2014
As Cedrat explains in this paper, the permanent magnet synchronous motor (PMSM) is becoming popular in high-performance applications as compared with other types of AC motors. A short circuit between turns is the most critical fault in a machine; it is quite difficult to detect and almost impossible to remove. There are a number of techniques used to detect turn-to-turn faults.
Enea HQ video download article
Trace Software video download article
Saint Romain de Colbosc, France
Founded in 1989, Trace Software International provides software solutions used to design, calculate, simulate and manage electrical installations in the aim of improving productivity, cost optimisation and automation of tedious tasks. In 20 years, Trace Software International has acquired ...